Category: Replica Omega Watches

Omega is definitely a pioneer in actively exploring diving watches. Omega’s Marine is the world’s first diving watch. In 1932, Omega launched the Marine watch equipped with a sapphire crystal, which could conquer water up to 135 meters deep. Faced with diving problems, Omega has always been tough and positive, actively exploring new materials and coping with the test of extremely high water pressure. In addition to bringing the world’s first sapphire glass diving watch in 1932, Omega also became the first watch brand to use 904L stainless steel in 1971.

In 1968, Omega cooperated with the French COMEX to develop a special diving watch, namely Ploprof (which means professional diver in French). Omega developed two types of prototypes according to the same specifications, and they were internally numbered Ploprof Zero and Ploprof One. The Ploprof that was finally released was the best with its 600-meter waterproof capability, and 600 meters was not the limit of Ploprof. In the final experiment, it could reach the limit of 1,370 meters. waterproof performance. All this is due to Omega’s excellent diving watch structural design, such as the iconic special structure, reinforced structure single case, left screw crown and special safety button at 3 o’clock.

This famous reinforced structure single case has also become one of Omega’s most representative designs. At that time, Omega pioneered the use of specially formulated 904L stainless steel, Uranus steel, to create this structure. At that time, Omega was interested in the excellent performance of 904L stainless steel, with better yield strength and corrosion resistance, which was more suitable for deep-sea operating environments. Traditional stainless steels such as 304L and 316L are susceptible to chloride stress corrosion cracking under certain conditions. However, chloride stress corrosion cracking resistance increases with increasing nickel and molybdenum content. Therefore, 904L, as a higher performance super austenitic stainless steel, has higher chloride stress corrosion cracking resistance.

In 2019, the Omega Seamaster Planet Ocean Ultra Deep watch set the world’s strongest record for diving watches with a water resistance of 15,000 meters. Omega teamed up with explorer Victor Vescovo to conquer the Mariana Trench, strapping the Seamaster Ultra Deep watch with a waterproof depth of 15,000 meters to the outside of the diving cabin and diving to the bottom of the Mariana Trench. In 2019, 10925 was created. Meter’s world deep diving record, in 2020 the Ultra Deep watch once again set a new world deep diving record of 10,935 meters. More replica Omega Seamaster Planet Ocean watches.

Omega’s special confidential formula of O-MEGASTEEL is prepared through a high-voltage electroslag remelting process and has excellent performance. The Vickers hardness is close to 300, which is about 45% higher than 316L, making it more scratch-resistant and durable. At the same time, O-MEGASTEEL, as a high-nitrogen stainless steel, has extremely strong yield strength, up to 560 MPa, which is twice that of traditional 316L or 904L stainless steel. Better structural strength means that the watch can be thinner and lighter under the same strength requirements, and can easily face the water pressure of 6,000 meters deep sea.

The Omega Planet Ocean 6000-meter deep-sea diving watch is far lighter than other diving watches, solving the long-standing problem of poor wearability of deep-sea diving watches. Thanks to the strong O-MEGASTEEL stainless steel, Omega can To achieve better performance, this gives the Ultra Deep 6000 watch excellent wearability. The Ultra Deep 6000-meter professional diving watch benefits from the excellent structural design of O-MEGASTEEL stainless steel and Omega. It is the leader among diving watches in terms of design, performance and texture.

In 2023, coinciding with the 75th anniversary of the Omega Seamaster family, Omega once again uses O-MEGASTEEL special stainless steel to present the Ultra Deep 6000-meter professional diving watch with a new Summer Blue style design. At the same time, Omega also replaced the Ploprof 1200 meters with this secret weapon, paying tribute to Ploprof’s first use of 904L stainless steel in the industry 52 years ago. This time, the baton of conquering the sea was passed to O-MEGASTEEL stainless steel.

 

In 2024, Omega launches the new Omega Speedmaster Moonwatch white lacquer dial, inspired by the legend of human space exploration and the glorious historical heritage of the Speedmaster series. In November 2023, Omega celebrity ambassador Daniel Craig wore this watch for the first time at the “Omega Planet Show” in New York. At that time, it aroused the fascination and expectation of many Speedmaster Moonwatch enthusiasts for this watch. More replica Omega Speedmaster watches.

The replica Omega Speedmaster Moonwatch white dial chronograph watch case is 42 mm and is made of stainless steel. It is paired with a comfortable retro-style stainless steel bracelet composed of five side-by-side arched links. The new watch inherits the classic design and uses a composite polishing process of polishing and brushing to make the watch more refined. The watch is equipped with a black anodized aluminum bezel, and its tachymeter scale is equipped with the iconic “Dot over 90” (the dot of 90 is above the number). It is specially designed for Speedmaster moon watch enthusiasts; the watch is equipped with Omega 3861 Master Chronometer Movement, this movement is also an upgraded version of the legendary 321 movement trusted by astronauts who landed on the moon. It is accurate and reliable in performance.

The most unique design highlight is its rare white dial. The Speedmaster was first launched in 1957. The main purpose of its innovative design was to create an easy-to-read watch to ensure that the time display is clear and legible. Therefore, the first generation Speedmaster watch had a black dial with white hands and hour markers. The new watch adopts the opposite color design, showing the same wonderful visual effect. The white dial is paired with black hands and hour markers, and the word “Speedmaster” on the dial is in bright red. The entire dial presents a glossy lacquer effect. This process is also the first time that Omega has applied it to the “stepped” dial of a moon watch.

Why a white dial? Its main inspiration comes from the white and black color scheme of astronauts’ spacesuits, especially those worn during extravehicular activities (EVA) such as spacewalks. Because Omega has always had a real historical origin with human space exploration and continues to this day. Since 1965, the Speedmaster Moonwatch has been approved by NASA as the designated equipment for all manned space missions, and became the first watch to land on the moon.

The replica Omega Speedmaster Moonwatch white dial chronograph has a white dial for another unique reason. Omega has worked with NASA to complete the top-secret project “Alaska Project” to create an ideal watch suitable for space missions. In 1969, the Speedmaster Alaska Project I watch was launched. After months of experimentation, Omega decided to use a white dial because of its very effective heat-reflective properties. In addition, the red element of the new watch is also derived from the design of NASA’s space suit. Since the Apollo 13 mission in 1970, the space suit has been decorated with red lines to display the commander’s title. The red “Speedmaster” lettering on the dial is also a tribute to the Alaska Project I prototype watch, echoing its red heat-insulating cover.

Replica Omega Constellation Co-Axial Master Chronometer watch, this 41mm fifth-generation Omega Constellation watch is a stainless steel model with a blue polished ceramic bezel and white enamel Roman numerals made of “Grand Feu” craftsmanship. It is also equipped with a white ceramic dial with a setting at 6 o’clock. There is a calendar window. The hands, Omega brand logo, star logo and three-dimensional hour markers are all in blue. More replica Omega Constellation watches.

The classic half-moon section on the side of the case and the “claw”. The blue ceramic bezel is paired with a white ceramic dial, which has a more refined color and texture. In addition, the case has been carefully polished to give it a delicate luster. The watch has a date window at 6 o’clock, which allows you to clearly obtain time information. Blue hour markers are dotted on the white ceramic dial, corresponding to the blue ceramic bezel and strap.

The replica Omega Constellation Co-Axial Master Chronometer watch is equipped with the Omega Master Chronometer Caliber 8900. Through the arched wear-resistant sapphire glass case back, the beauty of the movement’s operation is clearly visible. The watch has a 60-hour power reserve function, which is enough to meet people’s daily needs.

The watch buckle is engraved with the Omega brand logo, and is paired with a blue leather strap decorated with rubber lining. The comfort of the leather strap and the easy care of the rubber material are perfectly integrated through craftsmanship. With the stainless steel buckle, the wearer’s comfortable wearing experience is greatly improved.

The replica Omega Speedmaster Chronoscope watch cleverly integrates three special measurement functions – tachymeter, rangefinder and pulse meter – into the same watch through the design of different scales on the dial, allowing the performance of the Chronoscope to be maximized. To the point of admiration. The word “Chronoscope” combines two traditional meanings of the Greek word. “Chronos” means time and “Scope” means observation. A “Chronoscope” refers to a device designed to measure the duration between two locations or events. More replica Omega Speedmaster watches.

The replica Omega Speedmaster Chronoscope chronograph watch is a tribute and inheritance to Omega’s classic retro watches. The watch case is 43 mm, and the dial adopts a complex and delicate “snail” design style, which continues the characteristics of Omega chronograph watches in the 1940s. In the last century, the Chronoscope watch was given the iconic design of leaf-shaped hands. The Arabic numerals are decorated with a “spiral” track pattern below, which is particularly elegant.

Omega 9908 Master Chronometer manual winding movement, through the sapphire glass case back, you can appreciate the beauty of the movement. Another outstanding feature of this watch is the design of the movement splint. Its Arabic-style Geneva ripples extend outward from the balance wheel instead of the center of the movement. This is the first time that Omega has used this design style for a movement. In order to enhance the power reserve of the watch, this movement uses a double spring device and is covered with a wear-resistant DLC (Diamond-Like-Carbon) coating. At the same time, Omega’s column wheel structure also ensures that the various complex functions of the Speedmaster Chronoscope watch can operate accurately.

This year marks the 75th anniversary of the birth of the replica Omega Seamaster series, and it is Omega’s oldest product series, so Omega has also selected 7 iconic watches to celebrate the diversity of the series. More replica Omega Seamaster 300 watches.

Replica Omega Seamaster 300 75th Anniversary Summer Blue 234.30.41.21.03.002, the 41 mm stainless steel case is 13.9 mm thick. The gradient dial has a lighter color in the center and gradually transitions to a darker blue outwards. It has a sense of being about to burst out of the water from the bottom of the sea. With a “sandwich” dial structure, the light blue hour markers and digital time scales are clearly visible through the hollows on the upper dial. Some players may ask, Panerai is the most commonly used “sandwich” dial on the market. Is Omega following their example? Don’t get me wrong, Omega was used as early as the 1960s, and they all have historical origins. On the sandwich dial, the numbers and time scales are “hollowed out”, and the previously popular “lollipop” shaped central seconds hand is also reflected on the dial. This design is cute and retro.

Replica Omega Seamaster 300 75th Anniversary Summer Blue, the pattern of Poseidon and two seahorses on the back of the watch further demonstrates the uniqueness of this commemorative model. (The Seamaster logo depicts Poseidon, the god of the sea, holding a trident and driving two seahorses. The two seahorses are the original seahorse logo designed by Omega in 1956 and the current seahorse logo.)

Running under the case back is the Omega Master Chronometer Caliber 8912, which is polished and decorated with Arabic-style Geneva ripples. It can reach higher standards in the industry in terms of accuracy, anti-magnetic properties and overall performance; we cannot see the movement. , but the internal movement is also finely polished, equipped with a cardless hairspring balance wheel with a silicon hairspring, two series-connected barrels, and a two-way automatic winding system. This movement can resist a strong magnetic field of 15,000 Gauss, and can also provide a 60-hour power reserve with an error of 0/+5 seconds per day.

Replica Omega Seamaster Diver 300M Summer Blue 210.32.42.20.03.002, the case is 42 mm, stainless steel case, with blue rubber strap. The watch continues the iconic diving scale, hollow hands, eye-catching three-dimensional hour scale and helium escape valve of the previous model. The ceramic dial presents Omega’s new Summer Blue gradient and is decorated with a unique laser-etched ripple pattern, showing a modern style.

The rhodium-plated hands and three-dimensional hour markers are covered with light blue Super-LumiNova. The blue ceramic bezel is decorated with an enamel diving scale made of “Grand Feu” technology, and the tone is slightly darker than the hands and hour markers. Various blue elements of different shades are cleverly matched with the Summer Blue gradient dial, and the overall style is natural, harmonious and unique.

The date window of the replica Omega Seamaster Diver 300M Summer Blue watch is located at 6 o’clock, and the appearance is more symmetrical and balanced. The design of the helium exhaust valve at 10 o’clock is one of the iconic elements of the Seamaster Diver 300M. As we all know, the helium escape valve of a professional diving watch is crucial when performing underwater operations. This watch is equipped with a conical helium escape valve made by Omega, which can safely release helium and reduce pressure, preventing the watch from being damaged due to excessive pressure changes during diving. More replica Omega Seamaster Diver 300M watches.

The seahorse logo on the back of the watch depicts the sea god Poseidon holding a trident and driving two seahorses. The two seahorses are the seahorse logo originally designed by Omega in 1956 and the current seahorse logo. The watch is equipped with the Omega 8800 Master Chronometer movement, which has passed the Master Chronometer certification approved by the Swiss Federal Institute of Metrology (METAS). It has reached higher standards in the industry in terms of accuracy, anti-magnetic properties and overall performance.

The replica Omega Seamaster Aqua Terra 150M 75th Anniversary summer blue watch has a case of 41 mm and a symmetrical design in polished and brushed steel with an integrated blue rubber strap through polished solid steel The chain links are integrated with the case. More replica Omega Seamaster Aqua Terra 150M watches.

Stainless steel is the most common watchmaking material, which is beautiful, hard, economical and practical, so most commuter watches are also made of stainless steel. The new Aqua Terra watch is made of 316L stainless steel. After this material is bumped and worn, it can be renewed after simple repairs and polishing.

Omega uses wear-resistant and anti-reflective sapphire glass to create the mirror. The gradient Summer Blue tone is clearly visible through the sapphire glass mirror, echoing the 150-meter water resistance of the watch. The dial adopts PVD coating technology and is covered with lacquer, showing the polished effect of sun rays. The classic teak textured dial, with rhodium-plated hands and hour markers, is covered with a unique light blue Super-LumiNova luminous coating, and a light blue calendar window is placed at 6 o’clock.

The replica Omega Seamaster Aqua Terra 150M 75th Anniversary summer blue watch is equipped with a unique and commemorative case back. The Seamaster logo on the case back depicts Poseidon holding a trident and driving two horses. The two seahorses are the horse logo originally designed by Omega in 1956, and the Now used horse logo. The watch is equipped with the Omega 8900 Master Chronometer movement, which has a power reserve of 60 hours.

The case of the 43mm Omega Seamaster Aqua Terra 150M GMT Worldtimer watch is made of brushed grade 2 titanium, which is lighter in weight than the conventional stainless steel version. The weight of this titanium model with an integrated black rubber strap is only 94g, and the weight of the other green dial stainless steel world time watch with a rubber strap is 120g. There is still a difference between the two. In addition, the titanium material is also corrosion-resistant and biochemically inert, and can withstand more severe extreme temperatures.

The gray-black dial is all made by laser technology, and the black ceramic bezel has been brushed. The overall style of the watch is bold, avant-garde and sporty. The weight of ceramics is twice as light as that of fine steel. From the aspects of wear resistance, high scratch resistance, environmental protection and non-magnetism, it is very suitable for the production of watches. Inheriting the design concept of the previous World Time watch dial, the center of the new dial is also equipped with an inner dial, which presents an exquisite pattern overlooking the earth from the North Pole on the surface of grade 5 titanium, and engraves the contours and colors of the land with laser ablation technology. The design of the entire dial is a work of art, breathtaking.

There is a 24-hour scale ring on the outside of the inner dial of the replica Omega Seamaster Aqua Terra 150M GMT Worldtimer watch, and it distinguishes between night and day. The dial of the watch is surrounded by the names of 24 cities around the world representing different time zones, also created with laser technology. Our Beijing time corresponds to the 2 o’clock position on the dial, and also includes Biel, Switzerland, where Omega’s headquarters is located. All region names are in grey, and the red lacquer of “LONDON” is hand-crafted to highlight the universal time.

The Omega Seamaster Aqua Terra 150M GMT Worldtimer watch is equipped with blackened hands and hour scales, covered with white Super-LumiNova luminous coating, which emits blue light in a dark environment and complements the matte dial. The crown of the watch is also made of titanium and engraved with the brand logo. The watch is equipped with the Omega 8938 Master Chronometer movement, which has functions such as date display, GMT and world time display.

The replica Omega Seamaster Aqua Terra watch is widely favored for its youthful and energetic style, excellent anti-magnetic performance and precision. Today, the launch of the Omega Seamaster Aqua Terra Shades watch further radiates the color and vitality of this series. At the same time, the Omega Master Chronometer movement also provides strong power and reliable performance for the watch.

The dials of the replica Omega Seamaster Aqua Terra Shades watches are all made of brass, with a sun-brushed effect from the center to the surroundings. The dial of each watch is covered with lacquer, and the rich colors are very attractive. Thanks to the pioneering technology that has been continuously innovated in recent years, Omega is able to present a unique color on the watch beyond the past. Omega uses PVD technology and CVD technology to create dials with various colors. The PVD technology is called Physical Vapor Deposition, which can give the dial a specific color effect, such as terracotta. The CVD technology is called Chemical Vapor Deposition, which can achieve specific chemical reactions and present ideal hues, such as sea blue.

The dial of the 38 mm model is available in dark blue, laurel green, sandstone, orange and terracotta. The dial of the 34mm model is available in sea blue, lake green, sandstone, shell pink and lavender.

Adhering to the iconic style of the Aqua Terra watch, the case of the replica Omega Seamaster Aqua Terra Shades watch also adopts a symmetrical design. The case and crown are made of stainless steel and polished. The case back is designed with a corrugated edge. The watch is equipped with the Omega 8800 Master Chronometer movement, which has passed the rigorous test approved by the Swiss Federal Institute of Metrology (METAS), and its accuracy, anti-magnetic and overall performance have reached the highest standards in the industry. The bracelet of the watch is made of fine steel, and the small and exquisite arc-shaped links are newly upgraded, giving it a new charm.

Omega Seamaster Aqua Terra watch has two different sizes, the 38mm model can meet the needs of most men, and the 34mm replica Omega Seamaster Aqua Terra 150M Co-Axial Master Chronometer purple dial watch also provides more choices for the majority of women. The case of the watch is made of polished stainless steel, and the overall design is symmetrical. The case and crown are made of polished stainless steel. The lavender purple dial is made of brass and is treated with a lacquer finish. Sanding effect of sun rays. It can be seen that there is a calendar window at the 6 o’clock position of the watch, and the pointer, hour scale, and brand logo are all made of polished white 18K gold. More replica Omega Seamaster Aqua Terra watches.

The hour markers of the watch are designed with the hull of a sailboat, which is very creative. The dial of the 34mm model of the watch is available in five elegant tones: sea blue, lake green, sandstone, shell pink and lavender purple, giving consumers many choices , At the same time, you can choose different boards to match different moods according to your preferences. The watch can also be matched with a leather strap. All in all, a watch with a colorful dial can bring you more possibilities for matching.

With a thickness of 11.9 mm, the case is moderately thick and suitable for everyday wear. From the side view, the brand logo is engraved on the watch, and the back of the watch is designed with corrugated edges. The case back with transparent design allows us to see the beauty of the watch movement. The replica Omega Seamaster Aqua Terra 150M Co-Axial Master Chronometer purple dial watch is equipped with the Omega 8800 Master Chronometer movement, which has passed the Master Chronometer certification, and its accuracy, anti-magnetic properties and overall performance have reached the highest standards in the industry. In addition, the power reserve of the watch is 55 hours, which is enough for daily wear.